List: $895.00
Description: "Meet the studio condenser that captures every nuance.
With three switchable polar patterns, the large-diaphragm Audio-Technica AT4050 exhibits a remarkable combination of qualities: high-SPL capability with transparent and airy uppers/mids complemented by rich low-end qualities. Its dual large diaphragms are gold-vaporized and aged for consistent, outstanding performance. A precision-machined, nickel-plated brass acoustic element baffle provides rock-solid element stability and exceptional sensitivity.
Ideal for studio use and live sound productions with vocals, piano, strings, drum overheads, guitar amps, and more. "
Specifications: -
Audio-Technica’s AT4050 Features:
- Transparent uppers/mids balanced by rich low-end qualities combine with advanced acoustic engineering for extensive performance capabilities and highest quality
- Dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone
- The 2-micron-thick, vapor-deposited gold diaphragms undergo a five-step aging process so that the optimum characteristics achieved remain constant over years of use
- Three switchable polar patterns: omni, cardioid, figure-of-eight
- Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
- State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards
- Switchable 80 Hz hi-pass filter and 10 dB pad
- Custom shock mount provides superior isolation
SPECIFICATIONS |
|
| ELEMENT |
Externally-polarized (DC bias) condenser |
|
POLAR PATTERNS |
Cardioid,
Omnidirectional,
Figure-of-eight |
|
FREQUENCY RESPONSE |
20-18,000 Hz |
|
LOW FREQUENCY ROLL-OFF |
80 Hz, 12 dB/octave |
|
OPEN CIRCUIT SENSITIVITY |
-36 dB (15.8 mV), re 1V at 1 Pa |
|
IMPEDANCE |
100 ohms |
|
MAXIMUM INPUT SOUND LEVEL |
149 dB SPL, 1 kHz at 1% T.H.D.;
159 dB SPL, with 10 dB pad (nominal) |
|
NOISE |
17 dB |
|
DYNAMIC RANGE (typical) |
132 dB, 1 kHz at Max SPL |
|
SIGNAL-TO-NOISE RATIO |
77 dB, 1 kHz at 1 Pa |
|
PHANTOM POWER REQUIREMENTS |
48V DC, 4.2 mA typical |
|
SWITCHES |
Polar selection;
Flat, roll-off;
10 dB pad (nominal) |
|
WEIGHT |
18.0 oz (510 g) |
|
DIMENSIONS |
7.40" (188.0 mm) long,
2.10" (53.4 mm) maximum body diameter |
|
OUTPUT CONNECTORS |
Integral 3-pin XLRM-type |
|
ACCESSORIES FURNISHED |
AT8449 shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case |
|
AUDIO-TECHNICA CASE STYLE |
R1 |
|
Comments, Suggestions, Hints, or just simply love this mic?
Share your thoughts!
