Description: With the AKG Perception 200 Large-Diaphragm Condenser Mic, you get the extras that professionals need for demanding studio work, or for live music applications. Its large diaphragm delivers a full 20Hz-20kHz frequency response that will capture every nuance of any voice or instrument. It can be used in sound fields as high as 145dB, thanks to a switchable -10dB pre-attenuation pad. If you need to place the Perception 200 close to a chesty-voiced singer or a bass-heavy instrument, the mic has a low-frequency roll-off switch that engages a 12 dB-per-octave filter at 300Hz to minimize boominess. It comes with a full-size studio shockmount that eliminates mic stand vibration or footfalls from interfering with your recording and includes a hardshell road case to protect the mic from damage. Backed by AKG's generous 2-year parts and labor warranty.
The useful features and the included accessories emphasize the versatility of this microphone. It delivers a classic warm and transparent sound and conforms to the stringent standards defined for AKG recording products.
Specifications: -
AKG Perception 200 Large-Diaphragm Condenser Microphone Features:
- Large-diaphragm microphone
- Full 20Hz - 20kHz frequency response
- Switchable -10dB pre-attenuation pad
- 145dB SPL handling
- Roll-off filter of 12 dB-per-octave at 300Hz
- 2-year parts and labor warranty
- Includes shockmount and hardshell case
AKG Perception 200 Specifications
- Type: 1-inch large-diaphragm, true condenser pressure-gradient
microphone
- Polar Pattern: Cardioid
- Frequency Range: 20 to 20,000 Hz
- Sensitivity: 18 mV/Pa (-35 dBV)
- Maximum SPL: 135 / 145 dB SPL (0 / -10 dB) for 0.5 % THD
- Equivalent Noise Level (CCIR 468-2): 26 dB
- Equivalent Noise Level: 16 db-A (to IEC 60268-4)
- Signal/Noise Ratio (A-weighted): 78 dB (re 1 Pa)
- Preattenuation Pad: -10 dB (switchable)
- Bass Cut Filter Slope: 12 dB/octave, 300 Hz
- Impedance: <=200 ohms
- Recommended Load Impedance: >=1000 ohms
- Supply Voltage: 48 V ±4 V phantom power to DIN 45 596 / 268-15IEC
- Current Consumption: <=2 mA
- Environment Temperature: -10°C to +60°C, R.H.: 80% (+25°C)
- Connector: 3-pin XLR (pin 2 hot)
- Dimensions: 53 dia. x 160 mm high / 2 x 6.3 in.
- Net Weight: 525 g / 1.2 lbs.
Comments, Suggestions, Hints, or just simply love this mic? Share your thoughts!
